Wyze Plug (Pre-2021)

General Notes

This configuration is for Pre-2021 versions of the Wyze Smart Plug. Unlike newer versions, it features an ESP8266. The model number is WLPP1 (note: no suffix).

Initial Install

This device is glued together pretty tightly, but can be opened with the application of hot air and prying. It must be opened for the first upload.

GPIO Pinout

Pin	Function
GPIO14	Button
GPIO12	Relay
GPIO5	Relay LED

Basic Configuration

substitutions:
  device_name: wyze-plug-wlpp1
  friendly_name: "Wyze Plug"

esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}

esp8266:
  board: esp01_1m

# Enable logging
logger:

# Enable Home Assistant API
api:

# Allow Over-The-Air updates
ota:
  - platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  min_auth_mode: WPA2
  ap:
    ssid: "${friendly_name} Recovery"

captive_portal:

web_server:
  port: 80

# -------------------------
# Relay (GPIO12)
# -------------------------
switch:
  - platform: gpio
    name: "${friendly_name} Relay"
    id: relay
    pin: GPIO12
    restore_mode: RESTORE_DEFAULT_OFF
    on_turn_on:
      - output.turn_on: led_output
    on_turn_off:
      - output.turn_off: led_output

# -------------------------
# Physical Button (GPIO14)
# -------------------------
binary_sensor:
  - platform: gpio
    name: "${friendly_name} Button"
    pin:
      number: GPIO14
      mode: INPUT_PULLUP
      inverted: true
    on_press:
      - switch.toggle: relay

# -------------------------
# Blue Status LED (GPIO5, active-low)
# -------------------------
output:
  - platform: gpio
    id: led_output
    pin: GPIO5
    inverted: true