devices.esphome.io

Lingan SWA1

Device Type: plug
Electrical Standard: eu uk us
Board: esp8266

GPIO Pinout

Pin	Function
GPIO4	Blue Status LED (HIGH = off, LOW = on)
GPIO5	Relay and Red LED (HIGH = on, LOW = off)
GPIO13	Push Button (HIGH = off, LOW = on)

Basic Configuration - as a light entity

substitutions:
  devicename: esphome-device-name
  friendly_name: My Friendly Name
  restore_mode: RESTORE_DEFAULT_OFF

esphome:
  name: "${devicename}"
  friendly_name: "${friendly_name}"
  
esp8266:
  board: esp01_1m
  restore_from_flash: true

# Enable logging
logger:
  baud_rate: 0 # disable logging over uart
  level: WARN

# Enable Home Assistant API
api:

ota:
  password: !secret ota_pwd

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename}-ap"
    password: !secret ap_pwd
captive_portal:

# Webserver for IP address-based control - for when the internet or HA is down.
web_server:
  port: 80
  auth:
    username: !secret web_server_un
    password: !secret web_server_pw
  include_internal: true              # show state of hidden internal sensors, switches etc
  local: true                         # no internet required

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13      # push button
      mode: INPUT_PULLUP
      inverted: true
    name: "button"
    internal: true        # dont export to HA frontend
    on_press:
      - light.toggle: component_sw

light:
  - platform: binary
    id: component_sw
    name: none          # none = use friendly name
    output: output_relay
    restore_mode: ${restore_mode}

output:
  - id: output_relay
    platform: gpio
    pin: GPIO5          # relay

  - platform: esp8266_pwm                       # dimmer for status LED
    pin: GPIO4          # LED
    frequency: 3333Hz
    id: status_led
    max_power: 0.20                             # on   brightness (0 = off) => (1 = full on)
    min_power: 0.00                             # off  brightness (0 = off) => (1 = full on)
    inverted: true

script:
- id: flash_wifi_error
  mode: restart
  then:
    - while:
        condition:
          lambda: |-
            return true;
        then:
          - output.turn_on: status_led
          - delay: 500ms
          - output.turn_off: status_led
          - delay: 500ms

interval:
  # Check wifi is connected.
  - interval: 2s
    then:
      - if:
          condition:
            wifi.connected:
          then:
            - script.stop: flash_wifi_error
#            - output.turn_on: status_led       # Wifi connected, LED on.
            - output.turn_off: status_led       # Wifi connected, LED off.
          else:
            - script.execute: flash_wifi_error

Basic Configuration - as a switch entity

substitutions:
  devicename: esphome-device-name
  friendly_name: My Friendly Name
  restore_mode: RESTORE_DEFAULT_OFF

esphome:
  name: "${devicename}"
  friendly_name: "${friendly_name}"
  
esp8266:
  board: esp01_1m
  restore_from_flash: true

# Enable logging
logger:
  baud_rate: 0 # disable logging over uart
  level: WARN

# Enable Home Assistant API
api:

ota:
  password: !secret ota_pwd

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename}-ap"
    password: !secret ap_pwd
captive_portal:

# Webserver for IP address-based control - for when the internet or HA is down.
web_server:
  port: 80
  auth:
    username: !secret web_server_un
    password: !secret web_server_pw
  include_internal: true              # show state of hidden internal sensors, switches etc
  local: true                         # no internet required

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13      # push button
      mode: INPUT_PULLUP
      inverted: true
    name: "button"
    internal: true        # dont export to HA frontend
    on_press:
      - switch.toggle: component_sw

switch:
  - platform: gpio
    name: none          # none = use friendly name
    pin: GPIO5          # relay
    id: component_sw
    restore_mode: ${restore_mode}

output:
  - platform: esp8266_pwm                       # dimmer for status LED
    pin: GPIO4          # LED
    frequency: 3333Hz
    id: status_led
    max_power: 0.20                             # on   brightness (0 = off) => (1 = full on)
    min_power: 0.00                             # off  brightness (0 = off) => (1 = full on)
    inverted: true

script:
- id: flash_wifi_error
  mode: restart
  then:
    - while:
        condition:
          lambda: |-
            return true;
        then:
          - output.turn_on: status_led
          - delay: 500ms
          - output.turn_off: status_led
          - delay: 500ms

interval:
  # Check wifi is connected.
  - interval: 2s
    then:
      - if:
          condition:
            wifi.connected:
          then:
            - script.stop: flash_wifi_error
#            - output.turn_on: status_led       # Wifi connected, LED on.
            - output.turn_off: status_led       # Wifi connected, LED off.
          else:
            - script.execute: flash_wifi_error

Basic Configuration - as a fan entity

substitutions:
  devicename: esphome-device-name
  friendly_name: My Friendly Name
  restore_mode: RESTORE_DEFAULT_OFF

esphome:
  name: "${devicename}"
  friendly_name: "${friendly_name}"
  
esp8266:
  board: esp01_1m
  restore_from_flash: true

# Enable logging
logger:
  baud_rate: 0 # disable logging over uart
  level: WARN

# Enable Home Assistant API
api:

ota:
  password: !secret ota_pwd

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename}-ap"
    password: !secret ap_pwd
captive_portal:

# Webserver for IP address-based control - for when the internet or HA is down.
web_server:
  port: 80
  auth:
    username: !secret web_server_un
    password: !secret web_server_pw
  include_internal: true              # show state of hidden internal sensors, switches etc
  local: true                         # no internet required

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO13      # push button
      mode: INPUT_PULLUP
      inverted: true
    name: "button"
    internal: true        # dont export to HA frontend
    on_press:
      - fan.toggle: component_sw

fan:
  - platform: binary
    id: component_sw
    name: none          # none = use friendly name
    output: output_relay
    restore_mode: ${restore_mode}

output:
  - id: output_relay
    platform: gpio
    pin: GPIO5          # relay

  - platform: esp8266_pwm                       # dimmer for status LED
    pin: GPIO4          # LED
    frequency: 3333Hz
    id: status_led
    max_power: 0.20                             # on   brightness (0 = off) => (1 = full on)
    min_power: 0.00                             # off  brightness (0 = off) => (1 = full on)
    inverted: true

script:
- id: flash_wifi_error
  mode: restart
  then:
    - while:
        condition:
          lambda: |-
            return true;
        then:
          - output.turn_on: status_led
          - delay: 500ms
          - output.turn_off: status_led
          - delay: 500ms

interval:
  # Check wifi is connected.
  - interval: 2s
    then:
      - if:
          condition:
            wifi.connected:
          then:
            - script.stop: flash_wifi_error
#            - output.turn_on: status_led       # Wifi connected, LED on.
            - output.turn_off: status_led       # Wifi connected, LED off.
          else:
            - script.execute: flash_wifi_error

Edit this page on GitHub

Lingan SWA1

Lingan SWA1

Device Type: plugElectrical Standard: euukusBoard: esp8266

GPIO Pinout

Basic Configuration - as a light entity

Basic Configuration - as a switch entity

Basic Configuration - as a fan entity

On this page

Device Type: plug
Electrical Standard: eu uk us
Board: esp8266