devices.esphome.io

DETA Outdoor Double Powerpoint (6294HA)

DETA Outdoor Double Powerpoint (6294HA)

Device Type: plug
Electrical Standard: au
Board: bk72xx

Overview

The DETA Outdoor Double Powerpoint comes with a WB2S module.

Using Cloudcutter

Cloudcutter is a tool that simplifies flashing Tuya-based devices. It allows you to flash the firmware remotely, eliminating the need to physically open the device. Follow these instructions to flash your Deta 6294HA device using Cloudcutter.

Note on Power Monitoring

Power measurement uses the HLW8032 or CSE7766 protocol at 4800 baud. Program the device before installing the module as the RX pin is used.

GPIO Pinout

ESP-Based Pinout

PinFunction
GPIO03RX for CSE7766
GPIO04Button 1 (inverted)
GPIO05LED (inverted)
GPIO12Button 2 (inverted)
GPIO13Relay 1
GPIO14Relay 2

BK72XX-Based Pinout

PinFunction
RX1RX for CSE7766
P7Button 1 (inverted)
P8LED (inverted)
P24Button 2 (inverted)
P6Relay 1
P26Relay 2

Calibration

For calibration, check out Frenck's comprehensive guide.

Configuration

Note: The configuration examples include calibration data. Modify as needed.

substitutions:
  devicename: "patio-power-point-1"
  deviceid: patio_power_point_1
  friendlyname: "Patio Power Point 1"
  devicemodel: Deta Grid Connect 6294HA


  # Left Socket
  friendlyname_left: Pond Pump
  deviceicon_left: "mdi:fountain"
  # Right Socket
  friendlyname_right: Garden Lights
  deviceicon_right: "mdi:light-flood-up"


#################################


esphome:
  name: ${devicename}


bk72xx:
  board: generic-bk7231t-qfn32-tuya


packages:
  device_base: !include { file: common/device_base.yaml, vars: { friendlyname : 'Patio Power Point 1'} }


#################################


## ---------------- ##
##    Status LED    ##
## ---------------- ##
status_led:
  pin:
    number: P8
    inverted: true


## ----------------- ##
##      Buttons      ##
## ----------------- ##
binary_sensor:
  # Left Button
  - platform: gpio
    pin:
      number: P7
      mode: INPUT
      inverted: True
    id: left_button
    on_press:
      then:
        - switch.toggle: left_outlet
    # on_click:
    #   - min_length: 300ms
    #     max_length: 1000ms
    #     then:
    #       - switch.toggle: left_outlet
    internal: True


  # Right Button
  - platform: gpio
    pin:
      number: P24
      mode: INPUT_PULLUP
      inverted: True
    id: right_button
    # on_press:
    #   then:
    #     - light.toggle: right_outlet
    on_click:
      - min_length: 50ms
        max_length: 1000ms
        then:
          - light.toggle: right_outlet
    internal: True


## -------------------------------------------
## Switch & template for switch
## Light & output for light


## ---------------- ##
##      Relays      ##
## ---------------- ##
output:
  # Right Relay
  - platform: gpio
    pin: P26
    id: relay_2


switch:
  ## ---------------- ##
  ##      Relays      ##
  ## ---------------- ##
  # Left Relay
  - platform: gpio
    pin: P6
    id: relay_1


  ## ---------------- ##
  ##     Switches     ##
  ## ---------------- ##
  # Left Switch (Templated)
  - platform: template
    name: ${friendlyname_left}
    id: left_outlet
    icon: $deviceicon_left
    lambda: |-
      if (id(relay_1).state) {
        return true;
      } else {
        return false;
      }
    turn_on_action:
      - switch.turn_on: relay_1
    turn_off_action:
      - switch.turn_off: relay_1


## ---------------- ##
##     Switches     ##
## ---------------- ##
light:
  # Right Outlet
  - platform: binary
    name:  ${friendlyname_right}
    icon: ${deviceicon_right}
    output: relay_2
    restore_mode: RESTORE_AND_OFF
    id: right_outlet




## ------------------ ##
##  Power Monitoring  ##
## ------------------ ##
logger:
  baud_rate: 0


uart:
  rx_pin: RX1
  baud_rate: 4800


sensor:
  - platform: cse7766
    current:
      name: "${friendlyname} Current"
    voltage:
      name: "${friendlyname} Voltage"
    power:
      name: "${friendlyname} Power"
    energy:
      name: "${friendlyname} Energy"
Edit this page on GitHub

On this page