devices.esphome.io

LEDVANCE SMART PLUS PLUG CH

LEDVANCE SMART PLUS PLUG CH

Device Type: plug
Electrical Standard: ch
Board: bk72xx

LEDVANCE SMART PLUS PLUG CH based on BK7231T chip (WB2S). Can be flashed with esphome kickstart via tuya-cloudcutter. On publish date you need to use ESP-Home beta to build bk72xx targets. voltage_divider and current_resistor are estimated.

Product Image

ledvance_smart_plus_plug_ch

GPIO Pinout

PinFunction
GPIO6Relay
GPIO7Button
GPIO10LED
GPIO11BBL0937SEL
GPIO24BL0937CF1
GPIO26BL0937CF

Basic Configuration

# LEDVANCE SMART+ PLUG CH
substitutions:
  device_name: ledvance-pm-ch
  device_name_letters: ledvancepmch
  device_description: LEDVANCE SmartPlus Plug CH
  friendly_name: LEDVANCE SmartPlus Plug CH
  update_interval_seconds: "10s"


esphome:
  name: ${device_name}
  friendly_name: ${friendly_name}


# LibreTiny Platform
bk72xx:
  board: wb2s


# Enable logging
logger:


# Enable Web server
web_server:
  port: 80


# Enable Home Assistant API
api:
  encryption:
    key: <set here>


# Enable upload binaries over-the-air
ota:
  - platform: esphome
    password: <set here>


# Wifi Settings
wifi:
  ssid: <set here>
  password: <set here>


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: ${device_name}_fallback
    password: <set here>
captive_portal:


button:
  - platform: restart
    name: Restart ${device_name}


debug:
  update_interval: ${update_interval_seconds}


text_sensor:
  - platform: debug
    reset_reason:
      name: Reset Reason
  - platform: libretiny
    version:
      name: LibreTiny Version
  - platform: wifi_info
    ip_address:
      name: ESP IP Address
    ssid:
      name: ESP Connected SSID
    bssid:
      name: ESP Connected BSSID
    mac_address:
      name: ESP Mac Wifi Address


sensor:
  - platform: uptime
    name: Uptime
    unit_of_measurement: minutes
    filters:
      - lambda: return x / 60.0;


  - platform: wifi_signal
    name: Wifi Signal
    update_interval: 60s


  - platform: hlw8012
    model: BL0937
    cf_pin:
      number: P26
      inverted: true
    cf1_pin:
      number: P24
      inverted: true
    sel_pin:
      number: P11
      inverted: true
    current:
      name: BL0937 Current
    voltage:
      name: BL0937 Voltage
    power:
      name: BL0937 Power
    energy:
      name: BL0937 Energy
    update_interval: ${update_interval_seconds}
    voltage_divider: 800
    current_resistor: 0.001 ohm


binary_sensor:
  - platform: gpio
    id: binary_switch_1
    pin:
      number: P7
      inverted: true
      mode: INPUT_PULLUP
    on_press:
      then:
        - switch.toggle: switch_1


switch:
  - platform: gpio
    id: switch_1
    name: Relay 1
    pin: P6
    on_turn_on:
      - light.turn_on: light_status
    on_turn_off:
      - light.turn_off: light_status


light:
  - platform: status_led
    id: light_status
    pin: P10
Edit this page on GitHub

On this page