devices.esphome.io

POWRUI AHR-079

POWRUI AHR-079

Device Type: plug
Electrical Standard: us
Board: esp8266

GPIO Pinout

PinFunction
GPIO03Button 1 (Leftmost, closest to cable)
GPIO04Button 3
GPIO05Relay 1 (Leftmost, closest to cable)
GPIO12Relay 3
GPIO13Button 4 (Rightmost, closest to USB)
GPIO14Relay 2
GPIO15Relay 4 (Rightmost, closest to USB)
GPIO16Button 2

Pinout from Powrui AHR-079 Power Strip Template for Tasmota

Basic Configuration

substitutions:
  devicename: ahr_079
  friendlyname: POWRUI AHR-079


esphome:
  name: $devicename
  platform: ESP8266
  board: esp01_1m


wifi:
  ssid: !secret iot_wifi_ssid
  password: !secret iot_wifi_password
  fast_connect: true


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "${devicename} Fallback"
    password: !secret fallback_wifi_password


captive_portal:


# Enable logging
logger:
  baud_rate: 0


# Enable Home Assistant API
api:


ota:
  password: !secret ota_pw


# Buttons (not exposed in HA)
binary_sensor:
  - platform: gpio
    name: "${friendlyname} Button 1"
    id: button1
    internal: true
    pin:
      number: GPIO3
    on_press:
      then:
        - switch.toggle:
            id: relay1


  - platform: gpio
    name: "${friendlyname} Button 2"
    id: button2
    internal: true
    pin:
      number: GPIO16
    on_press:
      then:
        - switch.toggle:
            id: relay2


  - platform: gpio
    name: "${friendlyname} Button 3"
    id: button3
    internal: true
    pin:
      number: GPIO4
    on_press:
      then:
        - switch.toggle:
            id: relay3


  - platform: gpio
    name: "${friendlyname} Button 4"
    id: button4
    internal: true
    pin:
      number: GPIO13
    on_press:
      then:
        - switch.toggle:
            id: relay4


# Relays/Outlets
switch:
  - platform: gpio
    name: "${friendlyname} Outlet 1"
    icon: mdi:power-socket-us
    id: relay1
    pin:
      number: GPIO5
    restore_mode: RESTORE_DEFAULT_ON


  - platform: gpio
    name: "${friendlyname} Outlet 2"
    icon: mdi:power-socket-us
    id: relay2
    pin:
      number: GPIO14
    restore_mode: RESTORE_DEFAULT_ON


  - platform: gpio
    name: "${friendlyname} Outlet 3"
    icon: mdi:power-socket-us
    id: relay3
    pin:
      number: GPIO12
    restore_mode: RESTORE_DEFAULT_ON


  - platform: gpio
    name: "${friendlyname} Outlet 4"
    icon: mdi:power-socket-us
    id: relay4
    pin:
      number: GPIO15
    restore_mode: RESTORE_DEFAULT_ON
Edit this page on GitHub

On this page