devices.esphome.io

Feit BPA800/RGBW/AG/2

Feit BPA800/RGBW/AG/2

Device Type: light
Electrical Standard: us
Board: esp8266

Another Costco Variant. Do not confuse with Feit BPA800/RGBW/AG/2(P) as they use different GPIO pin numbers.

Be warned that you will have to disassemble the device to flash the firmware if it is newer than about March 2020. Tuya changed their firmware such that tuya-convert no longer works as before.

substitutions:
   comment: "...any comment, like the device hostname..."
   devicename: my_device
   platform: ESP8266
   board: esp01_1m


 esphome:
   name: $devicename
   platform: $platform
   board: $board
   comment: "${comment}"


 wifi:
   ssid: !secret wifi_ssid
   password: !secret wifi_password


   # Define SSID for hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: AP_${devicename}


 #enable captive portal for hotspot
 captive_portal:


 ota:
   password: !secret ota_pass


 api:
   encryption:
    key: !secret encryption_key


sm16716:
  data_pin: GPIO14
  clock_pin: GPIO4
  num_channels: 3
  num_chips: 1


output:
  - platform: sm16716
    id: output_red
    channel: 0
    power_supply: rgb_power
  - platform: sm16716
    id: output_green
    channel: 1
    power_supply: rgb_power
  - platform: sm16716
    id: output_blue
    channel: 2
    power_supply: rgb_power
  - platform: esp8266_pwm
    id: output_warm_white
    pin: GPIO12
  - platform: esp8266_pwm
    id: output_cold_white
    pin: GPIO05


light:
  - platform: rgbww
    name: "${devicename}"
    color_interlock: true
    restore_mode: RESTORE_DEFAULT_OFF
    red: output_red
    green: output_green
    blue: output_blue
    cold_white: output_cold_white
    warm_white: output_warm_white
    cold_white_color_temperature: 6500 K
    warm_white_color_temperature: 2700 K
    gamma_correct: 0.0


power_supply:
  - id: rgb_power
    pin: GPIO13
Edit this page on GitHub