Martin Jerry MJ-S01 Switch
Device Type:
Electrical Standard:
Board:
Notes
- Blue LED (GPIO4) mirrors relay state — on when relay is on
- Red LED (GPIO5) is inverted — on when relay is off (power indicator)
- Physical button is active LOW with internal pull-up
GPIO Pinout
| Pin | Function |
|---|---|
| GPIO4 | Blue status LED (active HIGH) |
| GPIO5 | Red power LED (active HIGH, inverted) |
| GPIO12 | Relay output (active HIGH) |
| GPIO13 | Physical button (active LOW, pull-up) |
Basic Configuration
substitutions: device_name: "martin-jerry-s01"
esphome: name: ${device_name} friendly_name: "Martin Jerry S01 Switch" comment: "MJ-S01 Single Pole Switch" name_add_mac_suffix: true project: name: MJ.S01 version: 1.0.0
esp8266: board: esp01_1m restore_from_flash: true
preferences: flash_write_interval: 1min
logger:
api:
time: - platform: homeassistant id: homeassistant_time
ota: - platform: esphome
wifi: ap: {}
captive_portal:
# GPIO Pin Mapping:# GPIO4 - Blue status LED (on when relay is on)# GPIO5 - Red power LED, inverted (on when relay is off)# GPIO12 - Relay output, active HIGH# GPIO13 - Physical button, active LOW
switch: - platform: gpio name: "Switch" id: relay pin: number: GPIO12 inverted: false restore_mode: RESTORE_DEFAULT_OFF on_turn_on: - output.turn_on: blue_led - output.turn_off: red_led on_turn_off: - output.turn_off: blue_led - output.turn_on: red_led
binary_sensor: - platform: gpio name: "Button" internal: true pin: number: GPIO13 inverted: true mode: INPUT_PULLUP on_press: - switch.toggle: relay
output: - platform: gpio id: blue_led pin: number: GPIO4 inverted: false - platform: gpio id: red_led pin: number: GPIO5 inverted: false
button: - platform: restart id: restart_button name: "Restart" - platform: safe_mode id: restart_button_safe_mode name: "Restart (Safe Mode)" - platform: factory_reset id: factory_reset_button name: "Factory Reset" disabled_by_default: true entity_category: config icon: mdi:restart-alert
sensor: - platform: wifi_signal name: "WiFi Signal" update_interval: 60s - platform: uptime name: "Uptime"
text_sensor: - platform: version name: "ESPHome Version" - platform: wifi_info ip_address: name: "IP Address" mac_address: name: "MAC Address" ssid: name: "SSID Connected"